Ignition System

Mazda Racing Competition Ignition System Parts
  • 04-11 Rx8 Racing Beat Spark Plug Wires (11516) - NLA

    04-11 Rx8 Racing Beat Spark Plug Wires (11516) - NLA

    No Longer Available.

    Racing Beat's ULTRA 8mm Silicone Ignition Wires for the 2004-2011 RX-8 are constructed with zinc-plated, high-strength copper wire to prevent corrosion. Threaded brass connectors are crimped to all wire ends to provide a superior connection. The silicone rubber used will handle over 100,000 volts and is capable of withstanding temperature ranges from -60 F to +480 F over exceptionally long periods. ULTRA Ignition wire sets have a wire wound resistor encapsulated in each spark plug boot. This feature reduces electromagnetic radiation.

    0.0
    Add first review
    Not rated yet
    • $179.95
    Out of stock
  • 93-95 Rx7 Racing Beat Spark Plug Wires - Street (11510) - NLA

    93-95 Rx7 Racing Beat Spark Plug Wires - Street (11510) - NLA

    No Longer Available.

    We offer ULTRA Ignition Wire sets for both street and race-application 1993-95 Twin Turbo RX-7 chassis. The Street Wire Set combines excellent radio noise suppression (5k Ohm resistance) with peak ignition performance, while the Race Wire Set provides lower resistance (0k Ohm) for peak sparkplug voltage, but, typically, increased substantial radio interference.

    Access to the stock 1993-95 RX-7 wires is very limited. Installation of these wires requires basic mechanical skills and can be completed by following the supplied step-by-step installation instructions.

    Racing Beats Ultra 8mm wire sets are constructed with zinc plated high strength copper to prevent corrosion. Threaded Brass connectors crimped on all ends provide a superior connection. The silicone rubber used will handle over 100,000 volts and is capable of withstanding temperature ranges from -60 to 480F for exceptionally long periods. Ignition have wound resistore encapuslated in each spark plug boot. This feature reduces electromagnetic radiation.

    To obtain reasonable horsepower gains while curbing radio interference from your ignition system, we recommend the use of resistor spark plugs with our ULTRA 8mm Street Ignition Wires. To obtain maximum power gains from our ULTRA 8mm Race Ignition Wires, we recommend the use of non-resistor spark plugs.

    Each wire set is assembled "in-house" by our Racing Beat technicians using the high quality ULTRA ignition components. Produced in Japan, these components are hand-assembled for each specific application that we offer. Each set is assembled and test to ensure correct resistance prior to final packaging. This custom assembly process provides us with complete control over the entire assembly procedure.

    0.0
    Add first review
    Not rated yet
    • $165.00
    Out of stock
  • 87-91 Turbo Rx7 Racing Beat Spark Plug Wires - Street (11515)

    87-91 Turbo Rx7 Racing Beat Spark Plug Wires - Street (11515)

    Racing Beat offers ULTRA Ignition Wire sets for street-application 1987-91 TURBO II engines. Street wire sets combine excellent radio noise suppression (5k Ohm resistance) with high performance.

    Racing Beat's ULTRA 8mm wire sets are constructed with zinc-plated high-strength copper wire to prevent corrosion. Threaded brass connectors are crimped to all wire ends to provide a superior connection. The silicone rubber used will handle over 100,000 volts and is capable of withstanding temperature ranges from -60 F to +480 F over exceptionally long periods. ULTRA Ignition wire sets have a wire wound resistor encapsulated in each spark plug boot. This feature reduces electromagnetic radiation.

    To obtain reasonable horsepower gains while curbing radio interference from your ignition system, we recommend the use of resistor spark plugs with our ULTRA 8mm Street Ignition Wires. To obtain maximum power gains from our ULTRA 8mm Race Ignition Wires, we recommend the use of non-resistor spark plugs.

    Each wire set is assembled "in-house" by our Racing Beat technicians using the high quality ULTRA ignition components. Produced in Japan, these components are hand-assembled for each specific application that we offer. Each set is assembled and test to ensure correct resistance prior to final packaging. This custom assembly process provides us with complete control over the entire assembly procedure.

    NOTE: Some aftermarket performance spark plugs have proven to be unacceptable in terms of manufacturing quality; specifically, these plugs develop compression leaks between the porcelain and steel subcomponents causing both premature spark plug boot failure and genuine horsepower losses. For this reason, we strongly encourage the use of the factory or Racing Beat's recommended spark plugs only for use with our wire sets.

    0.0
    Add first review
    Not rated yet
    • $205.95
    Sorry, we only have 1 of that item available
  • 86-91 N/A Rx7 Racing Beat Spark Plug Wires - Street (11519) - NLA

    86-91 N/A Rx7 Racing Beat Spark Plug Wires - Street (11519) - NLA

    Racing Beat's ULTRA Ignition Wire sets for street-application 1986-91 RX-7 engines combine excellent radio noise suppression (5k Ohm resistance) with high performance .

    Racing Beat's ULTRA 8mm wire sets are constructed with zinc-plated high-strength copper wire to prevent corrosion. Threaded brass connectors are crimped to all wire ends to provide a superior connection. The silicone rubber used will handle over 100,000 volts and is capable of withstanding temperature ranges from -60 F to +480 F over exceptionally long periods. ULTRA Ignition wire sets have a wire wound resistor encapsulated in each spark plug boot. This feature reduces electromagnetic radiation.

    To obtain reasonable horsepower gains while curbing radio interference from your ignition system, we recommend the use of resistor spark plugs with our ULTRA 8mm Street Ignition Wires. To obtain maximum power gains from our ULTRA 8mm Race Ignition Wires, we recommend the use of non-resistor spark plugs.

    Each wire set is assembled "in-house" by our Racing Beat technicians using the high quality ULTRA ignition components. Produced in Japan, these components are hand-assembled for each specific application that we offer. Each set is assembled and test to ensure correct resistance prior to final packaging. This custom assembly process provides us with complete control over the entire assembly procedure.

    NOTE: Some aftermarket performance spark plugs have proven to be unacceptable in terms of manufacturing quality; specifically, these plugs develop compression leaks between the porcelain and steel subcomponents causing both premature spark plug boot failure and genuine horsepower losses. For this reason, we strongly encourage the use of the factory or Racing Beat's recommended spark plugs only for use with our wire sets.

    0.0
    Add first review
    Not rated yet
    • $179.95
    Out of stock
  • 71-85 12A & 13B Racing Beat Spark Plug Wires - Street (11517) - NLA

    71-85 12A & 13B Racing Beat Spark Plug Wires - Street (11517) - NLA

    For Street Use

    Street wire sets combine excellent radio noise suppression with high performance (5k Ohm).

    0.0
    Add first review
    Not rated yet
    • $219.95
    Out of stock
  • 71-85 12A & 13B Racing Beat Spark Plug Wires - Race (11513) - NLA

    71-85 12A & 13B Racing Beat Spark Plug Wires - Race (11513) - NLA

    For Race Use Race

    Wires provides lower resistance (1k Ohm), but with substantial radio interference.

    0.0
    Add first review
    Not rated yet
    • $190.50
    Out of stock
  • 93-95 Rx7 Racing Beat Spark Plug Wires - Race (11511) - NLA

    93-95 Rx7 Racing Beat Spark Plug Wires - Race (11511) - NLA

    No Longer Available.

    We offer ULTRA Ignition Wire sets for both street and race-application 1993-95 Twin Turbo RX-7 engines. The Street Wire Set combines excellent radio noise suppression (5k Ohm resistance) with peak ignition performance, while the Race Wire Set provides lower resistance ("Zero" Ohm) for peak sparkplug voltage, but, typically, increased radio interference.

    Access to the stock 1993-95 RX-7 wires is very limited. Installation of these wires requires basic mechanical skills and can be completed by following the supplied step-by-step installation instructions.

    Racing Beat's ULTRA 8mm wire sets are constructed with zinc-plated high-strength copper wire to prevent corrosion. Threaded brass connectors are crimped to all wire ends to provide a superior connection. The silicone rubber used will handle over 100,000 volts and is capable of withstanding temperature ranges from -60 F to +480 F over exceptionally long periods. ULTRA Ignition wire sets have a wire wound resistor encapsulated in each spark plug boot. This feature reduces electromagnetic radiation.

    To obtain reasonable horsepower gains while curbing radio interference from your ignition system, we recommend the use of resistor spark plugs with our ULTRA 8mm Street Ignition Wires. To obtain maximum power gains from our ULTRA 8mm Race Ignition Wires, we recommend the use of non-resistor spark plugs.

    Each wire set is assembled "in-house" by our Racing Beat technicians using the high quality ULTRA ignition components. Produced in Japan, these components are hand-assembled for each specific application that we offer. Each set is assembled and test to ensure correct resistance prior to final packaging. This custom assembly process provides us with complete control over the entire assembly procedure.

    0.0
    Add first review
    Not rated yet
    • $165.00
    Out of stock
  • 86-91 N/A Rx7 Racing Beat Spark Plug Wires - Race (11514)

    86-91 N/A Rx7 Racing Beat Spark Plug Wires - Race (11514)

    Racing Beat's ULTRA 8mm wire sets for Race-Application 1986-1991 Non Turbo 13B engines provide lower resistance ("Zero" Ohm) for peak sparkplug voltage, but, typically, increased radio interference.

    Racing Beat's ULTRA 8mm wire sets are constructed with zinc-plated high-strength copper wire to prevent corrosion. Threaded brass connectors are crimped to all wire ends to provide a superior connection. The silicone rubber used will handle over 100,000 volts and is capable of withstanding temperature ranges from -60 F to +480 F over exceptionally long periods. ULTRA Ignition wire sets have a wire wound resistor encapsulated in each spark plug boot. This feature reduces electromagnetic radiation.
     
    To obtain reasonable horsepower gains while curbing radio interference from your ignition system, we recommend the use of resistor spark plugs with our ULTRA 8mm Street Ignition Wires. To obtain maximum power gains from our ULTRA 8mm Race Ignition Wires, we recommend the use of non-resistor spark plugs.

    Each wire set is assembled "in-house" by our Racing Beat technicians using the high quality ULTRA ignition components. Produced in Japan, these components are hand-assembled for each specific application that we offer. Each set is assembled and test to ensure correct resistance prior to final packaging. This custom assembly process provides us with complete control over the entire assembly procedure.

    NOTE: Some aftermarket performance spark plugs have proven to be unacceptable in terms of manufacturing quality; specifically, these plugs develop compression leaks between the porcelain and steel subcomponents causing both premature spark plug boot failure and genuine horsepower losses. For this reason, we strongly encourage the use of the factory or Racing Beat's recommended spark plugs only for use with our wire sets.

    0.0
    Add first review
    Not rated yet
    • $150.00
    Sorry, we only have 3 of that item available
  • 87-91 Turbo Rx7 Racing Beat Spark Plug Wires - Race (11520)

    87-91 Turbo Rx7 Racing Beat Spark Plug Wires - Race (11520)

    Racing Beat's ULTRA Ignition Wire sets for race-application 1987-91 RX-7s provide lower resistance ("Zero" Ohm) for peak sparkplug voltage, but, typically, increased radio interference.

    Racing Beat's ULTRA 8mm wire sets are constructed with zinc-plated high-strength copper wire to prevent corrosion. Threaded brass connectors are crimped to all wire ends to provide a superior connection. The silicone rubber used will handle over 100,000 volts and is capable of withstanding temperature ranges from -60 F to +480 F over exceptionally long periods. ULTRA Ignition wire sets have a wire wound resistor encapsulated in each spark plug boot. This feature reduces electromagnetic radiation.  

    To obtain reasonable horsepower gains while curbing radio interference from your ignition system, we recommend the use of resistor spark plugs with our ULTRA 8mm Street Ignition Wires. To obtain maximum power gains from our ULTRA 8mm Race Ignition Wires, we recommend the use of non-resistor spark plugs.

    Each wire set is assembled "in-house" by our Racing Beat technicians using the high quality ULTRA ignition components. Produced in Japan, these components are hand-assembled for each specific application that we offer. Each set is assembled and test to ensure correct resistance prior to final packaging. This custom assembly process provides us with complete control over the entire assembly procedure.

    NOTE: Some aftermarket performance spark plugs have proven to be unacceptable in terms of manufacturing quality; specifically, these plugs develop compression leaks between the porcelain and steel subcomponents causing both premature spark plug boot failure and genuine horsepower losses. For this reason, we strongly encourage the use of the factory or Racing Beat's recommended spark plugs only for use with our wire sets.

    0.0
    Add first review
    Not rated yet
    • $179.95
    Sorry, we only have 2 of that item available
  • 90-93 Miata Racing Beat Spark Plug Wires (51001) - NLA

    90-93 Miata Racing Beat Spark Plug Wires (51001) - NLA

    Racing Beat's ULTRA 8mm Red Hot Ignition Wire Sets for the 1990-93 Miata utilize silicone rubber for both the 8mm wire insulation and boots, with a minimum rating of 100,000 volts in all areas. The silicone rubber is designed to withstand continuous temperatures ranging from -60 degrees F to +480 degrees F. Brass "screw-together" connectors are double-crimped onto the zinc-clad, stranded copper wire ends to provide absolute contact with no possibility of deterioration. The silicone boots seal watertight at the spark plugs and ignition coil for added protection. A unique design feature seals a wire wound resistor inside the spark plug terminal to optimize noise suppression and power.

    These are the wires that Miata Magazine tested in the February 2000 issue. As stated, "The preferred choice for performance was the Racing Beat wires. On a dyno, the wires actually provided 1.5 horsepower. In addition, the acceleration and engine response was crisper than the other wires."

    0.0
    Add first review
    Not rated yet
    • $149.95
    Out of stock
  • 94-00 Miata Racing Beat Spark Plug Wires (51003)

    94-00 Miata Racing Beat Spark Plug Wires (51003)

    Racing Beat's ULTRA 8mm Red Hot Ignition Wire Sets for the 1994-2000 Miata utilize silicone rubber for both the 8mm wire insulation and boots, with a minimum rating of 100,000 volts in all areas. The silicone rubber is designed to withstand continuous temperatures ranging from -60 degrees F to +480 degrees F. Brass "screw-together" connectors are double-crimped onto the zinc-clad, stranded copper wire ends to provide absolute contact with no possibility of deterioration. The silicone boots seal watertight at the spark plugs and ignition coil for added protection. A unique design feature seals a wire wound resistor inside the spark plug terminal to optimize noise suppression and power.

    These are the wires that Miata Magazine tested in the February 2000 issue. As stated, "The preferred choice for performance was the Racing Beat wires. On a dyno, the wires actually provided 1.5 horsepower. In addition, the acceleration and engine response was crisper than the other wires."

    To obtain maximum horsepower gains, while curbing radio interference from your ignition system, we recommend the use of resistor spark plugs with our ULTRA 8mm Street Ignition Wires.

    0.0
    Add first review
    Not rated yet
    • $149.95
    Sorry, we only have 3 of that item available
  • 01-05 Miata Racing Beat Spark Plug Wires (51007) - NLA

    01-05 Miata Racing Beat Spark Plug Wires (51007) - NLA

    The Racing Beat ULTRA 7mm Red Hot Ignition Wire Sets for the 2001-2005 Miata and the 2001-2003 2.0 L Protege utilize silicone rubber for both the 7mm wire insulation and boots, with a minimum rating of 100,000 volts in all areas. The silicone rubber is designed to withstand continuous temperatures ranging from -60 degrees F to +480 degrees F. Brass "screw-together" connectors are double-crimped onto the zinc-clad, stranded copper wire ends to provide absolute contact with no possibility of deterioration. The silicone boots seal watertight at the spark plugs and ignition coil for added protection. A unique design feature seals a wire wound resistor inside the spark plug terminal to optimize noise suppression and power.

     

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $110.95
    Out of stock
  • 10.5 NGK Racing Competition Spark Plug Set (0000-10-R105)

    10.5 NGK Racing Competition Spark Plug Set (0000-10-R105)

    Set of four 10.5 heat range NGK Racing Spark Plugs.

    Recommended for all rotary engines used in racing applications.

    Use with thinner spark plug washer to move flash point closer and increase power.

    NGK recommends that you start your vehicle and bring up to operating temperature with stock heat range plugs, then switch to the racing plugs.

    NGK part numbers:

    • R6725-105
    • 3857
    0.0
    Add first review
    Not rated yet
    • $164.00
    Sorry, we only have 951 of that item available
  • 11.5 NGK Racing Competition Spark Plug Set (0000-10-R115)

    11.5 NGK Racing Competition Spark Plug Set (0000-10-R115)

    Set of 4 NGK Racing Spark Plugs.

    Recommended for all rotary engines used in racing applications.

    Use with thinner spark plug washer to move flash point closer and increase power.

    NGK recommends that you start your vehicle and bring up to operating temperature with stock heat range plugs, then switch to the racing plugs.

    NGK part numbers:

    • R6725-115
    • 4482
    0.0
    Add first review
    Not rated yet
    • $164.00
    Sorry, we only have 964 of that item available
  • 11.0 NGK Racing Competition Spark Plug Set (0000-10-R11)

    11.0 NGK Racing Competition Spark Plug Set (0000-10-R11)

    Set of 4 NGK Racing Spark Plugs.

    Recommended for all rotary engines used in racing applications.

    Use with thinner spark plug washer to move flash point closer and increase power.

    NGK recommends that you start your vehicle and bring up to operating temperature with stock heat range plugs, then switch to the racing plugs.

    NGK part numbers:

    • R6725-11
    • 4311
    5.0
    Add first review
    Score: 5.0 (votes: 1)
    No reviews.
    • $164.00
    Sorry, we only have 982 of that item available

Bestsellers