0 items in cart
The addition of a larger aftermarket sway bar can increase the stress loads on the original OEM sway bar end links. To combat these increased loads, Racing Beat has designed a set of OEM style aftermarket end links for the RX-8 to absorb the increased demands of a larger front sway bar.
Incorporated into the design of these links are larger 12mm mounting studs and matching retaining nuts. The sealed bearing is self lubricating and should offer many miles of maintenance free driving. Each set is sold as a front pair.
These end links are intended for street and autocross applications and are highly recommended for use with the Racing Beat bar. Although these upgraded end links can be used with the stock sway bar, we believe that the original links are adequately suited for use with the stock bar.
Due to the larger diameter studs provided on the Racing Beat end links, both the sway bar ends and the mounting holes on the chassis must be enlarged to accept the mounting studs. Provided in the end link kit is the appropriate sized drill bit and a drilling guide to accomplish this task. Also included are detailed instructions complete with drilling suggestions and torque specifications.
The reason that the RB sway bar is provided with a 10mm hole is to allow use of the stock OEM end links. If we supplied the RB Sway Bar with a larger 12mm hole, then it would become mandatory to use the aftermarket links. Although the use of the RB End link Kit requires minor modifications, the rather cheap
© 2004 - 2018 Atkins Rotary. All rights reserved.
Powered by X-Cart