0 items in cart
Fits 12A & 13B
The Street/Strip HD (Heavy Duty) 225mm Clutch Disc for the 1983-92 Non-Turbo RX-7s is similar to the standard Street/Strip Disc, but has an additional feature to increase its strength: twice the number of rivets attaching each friction lining to the clutch plate.The result is a disc that engages quicker (requiring a bit more technique when starting) and releases quicker (making life easier for the transmission synchros). This disc is well suited for high output street engines and interchanges exactly with the stock disc. It can be used with either a stock pressure plate or our Street/Strip Pressure Plate.
Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage. (See bottom of parts list).Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.
© 2004 - 2018 Atkins Rotary. All rights reserved.
Powered by X-Cart