0 items in cart
Proven to be one of our most popular performance replacement clutch discs, the Sport/Strip Heavy Duty 240mm Clutch Disc for the 1987-95 RX-7 TURBO chassis utilizes flattened marcel springs to reduce flexing, and two rivets per marcel to increase lining strength. The result is a disc that requires a bit more technique when starting, and releases quicker. This disc is suited for high output street engines and works with the stock pressure plate.Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.WARNING: None of the Flywheel or Clutch components shown in this catalog should ever be allowed to exceed 10,500 RPM under any condition. This same RPM limit applies to stock components. You must use an engine RPM-limiter to prevent excessive RPM. If your RX-7 engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield, or ballistic blanket. Failure to implement the above may result in serious injury or even death.
© 2004 - 2018 Atkins Rotary. All rights reserved.
Powered by X-Cart