93-95 Rx7 Racing Beat Spring Set (14083)
Racing Beat has designed suspension coil springs that are suitable for a street or track use. This complete set of front and rear suspension springs were designed specifically for the 1993-95 RX-7 by Racing Beat's engineering staff. Ideally suited for use with either the OEM shocks, or your favorite aftermarket units, these springs interchange exactly with the stock springs on the RX-7.
These 1993-95 RX-7 springs will provide a front and rear drop of approximately .75 inch (front) and 1.5 inch (rear). The spring rates are as follows: front - 260, rear - 212. This equates to a 7 percent increase over the stock rates.
If your car is still running on the original shocks, it is certainly time to consider a replacement! We do not suggest installing aftermarket performance-based springs on a set of tired high mileage shocks, as this may produce a "springy" and bouncy ride. If you prefer to keep the ride quality of your car more "stock like", you may wish to replace your old shocks with a set of Mazda units, or an equivalent set of aftermarket OEM style replacements. However, if you wish to noticeably improve the handling performance of your car, combine a set of new springs with a set of aftermarket Tokico or Koni performance shocks. Although the ride quality will become noticeably firmer, the handling improvements will be a much-welcomed improvement.
These springs are available separately for replacement or special applications: Front (PN 14024) & Rear (PN 14025)
Prices shown are for a complete set of four springs.
2 x 14024 - Front spring
2 x 14025 - Rear spring