AEM Exhaust Gas Temperature Sensor Kit (30-2050)
This RTD Style EGT sensor is specifically designed to monitor high temperature environments in the automotive applications.
Kit Contents:
- One RTD temperature sensor with male connector and male thread.
- One mating connector assembly.
- One weld-on bung w/female thread.
Installation Suggestion:
Turbocharged engines:
1.5 upstream of the Turbine inlet with sensor axis in the vertical Plane and sensor end down.
Naturally aspirated:
1.5 downstream of the collector or end of exhaust manifold in the same configuration as for turbocharged applications.
Wiring:
The wiring for the unit is simple and consists of only 2 wires. Polarity is not important. For the 30-1000, 30-1001, 30-1002, 30-1010, 30-1012, 30-1020, 30-1100, and 30-1101 units, connect 1 wire to 5 volts and the other to an open EGT input channel on the EMS. On all other EMS units, connect 1 wire to a good ground and the other to an open EGT input channel on the EMS.
AEM EMS Calibration:
Use the Wizard in AEMPro to insert the proper values in your calibration file.