AEM Exhaust Gas Temperature Sensor Kit (30-2050)
This RTD Style EGT sensor is specifically designed to monitor high temperature environments in the automotive applications.
Kit Contents:
- One RTD temperature sensor with male connector and male thread.
- One mating connector assembly.
- One weld-on bung w/female thread.
Installation Suggestion:
Turbocharged engines:
1.5 upstream of the Turbine inlet with sensor axis in the vertical Plane and sensor end down.
Naturally aspirated:
1.5 downstream of the collector or end of exhaust manifold in the same configuration as for turbocharged applications.
Wiring:
The wiring for the unit is simple and consists of only 2 wires. Polarity is not important. For the 30-1000, 30-1001, 30-1002, 30-1010, 30-1012, 30-1020, 30-1100, and 30-1101 units, connect 1 wire to 5 volts and the other to an open EGT input channel on the EMS. On all other EMS units, connect 1 wire to a good ground and the other to an open EGT input channel on the EMS.
AEM EMS Calibration:
Use the Wizard in AEMPro to insert the proper values in your calibration file.
- Fitment TypeVehicle Specific
Model | Year | Engine |
---|---|---|
Rx8 | 04-08 | 13B-MSP |
Rx8 | 09-11 | 13B-MSP |
Miata/Mx5 | 1990-1993 | 1.6L |
Miata/Mx5 | 1994-1997 | 1.8L |
Miata/Mx5 | 1999-2000 | 1.8L |
Miata/Mx5 | 2001-2005 | 1.8L |
Miata/Mx5 | 2006-2013 | 2.0L |
Miata/Mx5 | 2016-2018 | 2.0L |
Cosmo | 90-95 | 20B |
Rx7 | 1979 | 12A |
Rx7 | 1980 | 12A |
Rx7 | 1981 | 12A |
Rx7 | 1982 | 12A |
Rx7 | 1983 | 12A |
Rx7 | 1984 | 12A |
Rx7 | 1984 | 13B |
Rx7 | 1985 | 12A |
Rx7 | 1985 | 13B |
Rx7 | 1986 | Non-Turbo |
Rx7 | 1987 | Non-Turbo |
Rx7 | 1987 | Turbo |
Rx7 | 1988 | Non-Turbo |
Rx7 | 1988 | Turbo |
Rx7 | 1989 | Non-Turbo |
Rx7 | 1989 | Turbo |
Rx7 | 1990 | Non-Turbo |
Rx7 | 1990 | Turbo |
Rx7 | 1991 | Non-Turbo |
Rx7 | 1991 | Turbo |
Rx7 | 1993 | Automatic |
Rx7 | 1993 | Manual |
Rx7 | 1994 | Manual |
Rx7 | 1994 | Automatic |
Rx7 | 1995 | Manual |
Rx7 | 1995 | Automatic |